Barn EOCO CPE520 Configuration
Configuration
IP Address: 172.16.0.4
Subnet Mask: 255.255.255.240
Gateway: 0.0.0.0 (none)
Operation Mode: AP-Client (AP disabled)
- Connect to SSID: [House CPE520 SSID]
- Security: Match House settings
Wireless Settings: Same as House EOCO
Advanced: VLAN Mode: Transparent
AMPDU: Disabled
Beacon Interval: 200ms
Subnet Mask: 255.255.255.240
Gateway: 0.0.0.0 (none)
Operation Mode: AP-Client (AP disabled)
- Connect to SSID: [House CPE520 SSID]
- Security: Match House settings
Wireless Settings: Same as House EOCO
Advanced: VLAN Mode: Transparent
AMPDU: Disabled
Beacon Interval: 200ms
Configuration Explanation
IP Address: 172.16.0.4 completes the addressing for the bridge devices. No gateway is needed as it's a layer 2 device.
Operation Mode: AP-Client mode allows this device to connect to the House EOCO as a client. Disabling AP prevents it from broadcasting its own network.
Wireless Settings: Must exactly match the House EOCO settings for frequency, channel width, and security to establish a connection.
Beacon Interval: Increasing to 200ms reduces overhead and improves performance for the bridge connection, which doesn't need frequent beacons.